Moto Guzzi Breva 1100, 2009

Moto Guzzi Breva 1100, 2009 

 

 

USA SPECIFICATIONS

ENGINE
Type 90° V-Twin, four-stroke
Cooling system Air cooled
Displacement 1,064 cc
Bore and stroke 3.6” x 3.15” (92 mm x 80 mm)
Compression ratio 9,8 : 1
Timing system Two overhead valves operated by light alloy push-rods and rockers; exhaust valve maximum lift: 106° B.T.D.C. of overlap inlet valve maximum lift: 104° A.T.D.C. of overlap
Maximum power 63 KW (86 CV) at 7,800 rpm
Maximum torque 86.5 Nm at 6,000 rpm
Fuel system Weber-Marelli electronic fuel injection with stepper motor control
Starting system Electric
Ingition Inductive discharge, digitally controlled, electronic twin spark ignition
Exhaust system Stainless steel, 2 in 1, with three way catalyser and Lambda probe oxygen sensor

TRANSMISSION
Gear 6 speed
Internal ratios 1^ 17/38 = 1 : 2.235
2^ 20/34 = 1 : 1.700
3^ 23/31 = 1 : 1.347
4^ 26/29 = 1 : 1.115
5^ 31/30 = 1 : 0.967
6^ 29/25 = 1 : 0.862
Lubrication Splash
Primary drive Helical gears, ratio 26/35 = 1 : 1.458
Final drive CA.R.C. Compact Reactive Shaft Drive; double universal joint with floating bevel gear, ratio 12/44 = 1 : 3.667
Clutch Dry

CHASSIS
Frame Double cradle, in high tensile strenght tubular steel

Wheelbase 58.86” (1,495 mm)
Trail 4.7” (120 mm)
Rake 25°30’
Steering angle 32°
Front suspension Telescopic hydraulic fork with Ø 45 mm, preload adjustable
Front wheel travel 4.7” (120 mm)
Rear suspension Single arm suspension progressive linkage, rear shock absorber
adjustable in rebound and pre-load (hydraulic)
Rear wheel travel 5.5” (140 mm)
Front brake Twin Ø 12.6” (320 mm) stainless steel floating discs, four piston calipers
Rear brake Single Ø 11.1” (282 mm) steel disc, two piston caliper
Wheels three spokes light alloy wheels, gravity casting
Front wheel 120/70 ZR17”
Rear wheel 180/55 ZR17”
Front tyre 3.50” x 17”
Rear tyre 5.50” x 17”